🎉 Up to 70% Off Selected ItemsShop Sale
1 / 14
+9
Bioflex Push-fit Labret Base
Bioflex Internal Thread Push-fit Labret BASE ONLY. Available in various lengths in 1.0mm, 1.2mm and 1.6mm gauge. These Labret shafts can be autoclaved. NB: These are push-fittings.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Bioflex Internal Thread Push-fit Labret BASE ONLY. Available in various lengths in 1.0mm, 1.2mm and 1.6mm gauge. These Labret shafts can be autoclaved. NB: These are push-fittings.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Select Gauge (mm), Length (mm)
From $0.83
Original: $2.78
-70%Bioflex Push-fit Labret Base—
$2.78
$0.83Description
Bioflex Internal Thread Push-fit Labret BASE ONLY. Available in various lengths in 1.0mm, 1.2mm and 1.6mm gauge. These Labret shafts can be autoclaved. NB: These are push-fittings.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
