🎉 Up to 70% Off Selected ItemsShop Sale
1 / 14
+9
Bioflex Push-fit Labret with Zircon Steel Ball (Gold colour)
Bioflex push-fit Labrets with a 2mm Zircon Steel Ball (Gold colour) available in 1.0mm, 1.2mm or 1.6mm gauge Labrets. Also available with Zircon Steel Jewelled Disk Tops. NB: These are push-fittings. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Bioflex push-fit Labrets with a 2mm Zircon Steel Ball (Gold colour) available in 1.0mm, 1.2mm or 1.6mm gauge Labrets. Also available with Zircon Steel Jewelled Disk Tops. NB: These are push-fittings. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Select Gauge (mm), Length (mm)
From $1.26
Original: $4.19
-70%Bioflex Push-fit Labret with Zircon Steel Ball (Gold colour)—
$4.19
$1.26Description
Bioflex push-fit Labrets with a 2mm Zircon Steel Ball (Gold colour) available in 1.0mm, 1.2mm or 1.6mm gauge Labrets. Also available with Zircon Steel Jewelled Disk Tops. NB: These are push-fittings. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
