🎉 Up to 70% Off Selected ItemsShop Sale
1 / 21
+16
Bioflex Push-fit Labret with Steel Jewelled Disk
Bioflex push fit Labret with a 2.35, 3mm or 4mm diameter Surgical Steel Jewelled Top. Lengths available 1.0mm gauge and 1.2mm gauge labrets. NB: These are push-fittings. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Bioflex push fit Labret with a 2.35, 3mm or 4mm diameter Surgical Steel Jewelled Top. Lengths available 1.0mm gauge and 1.2mm gauge labrets. NB: These are push-fittings. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Select Gauge (mm), Length (mm), Gem size (mm) and Colour
From $1.39
Original: $4.62
-70%Bioflex Push-fit Labret with Steel Jewelled Disk—
$4.62
$1.39Description
Bioflex push fit Labret with a 2.35, 3mm or 4mm diameter Surgical Steel Jewelled Top. Lengths available 1.0mm gauge and 1.2mm gauge labrets. NB: These are push-fittings. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
