🎉 Up to 70% Off Selected ItemsShop Sale
1 / 10
+5
Bioflex Push-fit Labret with Titanium Ball
These Bioflex Push-fit Labrets with Titanium Ball could help your piercing heal more quickly as it causes less friction on your piercing. Available with a 2.5mm Titanium ball in 1.0mm and 1.2mm gauge. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
These Bioflex Push-fit Labrets with Titanium Ball could help your piercing heal more quickly as it causes less friction on your piercing. Available with a 2.5mm Titanium ball in 1.0mm and 1.2mm gauge. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Select Gauge (mm), Length (mm), Ball size (mm), Colour
From $1.49
Original: $4.96
-70%Bioflex Push-fit Labret with Titanium Ball—
$4.96
$1.49Description
These Bioflex Push-fit Labrets with Titanium Ball could help your piercing heal more quickly as it causes less friction on your piercing. Available with a 2.5mm Titanium ball in 1.0mm and 1.2mm gauge. Twist while pulling apart to separate.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
