🎉 Up to 70% Off Selected ItemsShop Sale
1 / 27
+22
Bioflex Push-fit Labret with Zircon Steel Jewelled Top (Gold colour)
Bioflex push fit Labret with Zircon Steel Jewelled Top (gold colour) available in 1.0mm, 1.2mm or 1.6mm gauge labrets. Select from a jewelled disk in 2.35mm or 3mm. NB: These are push-fittings. Twist while pulling apart to separate. Also available with a Zircon Steel 2mm plain ball.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Bioflex push fit Labret with Zircon Steel Jewelled Top (gold colour) available in 1.0mm, 1.2mm or 1.6mm gauge labrets. Select from a jewelled disk in 2.35mm or 3mm. NB: These are push-fittings. Twist while pulling apart to separate. Also available with a Zircon Steel 2mm plain ball.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
Select Gauge (mm), Length (mm), Gem size (mm) and Colour
From $1.42
Original: $4.74
-70%Bioflex Push-fit Labret with Zircon Steel Jewelled Top (Gold colour)—
$4.74
$1.42Description
Bioflex push fit Labret with Zircon Steel Jewelled Top (gold colour) available in 1.0mm, 1.2mm or 1.6mm gauge labrets. Select from a jewelled disk in 2.35mm or 3mm. NB: These are push-fittings. Twist while pulling apart to separate. Also available with a Zircon Steel 2mm plain ball.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
There are 2 international standards for autoclaving Bioflex:
1. Temperature 121 Degrees Celsius at pressure 15 pounds per square inch for 15 minutes.
2. Temperature 134 Degrees Celsius at pressure 32 pounds per square inch for 3 minutes.
Exceeding this can result in deformation.
NB: You cannot sterilise Bioflex in a dry heat autoclave. You need a steam sterilisation process with water.
